Old raised garden, on the ground, bed has rotted out. Decided to make a smaller elevated garden..
I took a grinder and cut off the connector/hook thing on the end.
I then cut a piece of angle iron and lag bolted it to a some 4×4
I then slapped on some 1×6 pine boards to the 4x4s
After that I cut some NON-treated cedar picket fence board down and laid them between the bed rails
I put some braces on the side boards and stapled in some plastic hardware fabric
Lastly, I just put on some top and corner trim boards to hide the rough edges.
That’s it, now just to actually use it