Earlier I put in a bunch of relays. You can see that on this page Relays . Two of them were for Low and High beam lights.
First I had to find which wires were used for High and Low beam. I used a video from Satchel McQueen Click and took a screen grab of when he identifies the wires.
I added a small fuse box. The white fuses are 25A and are for the headlights. The yellow fuse is for the horn. I have already connected the feeds from the relays on the left hand side of the fuse block. I then cut open the wire harness that feeds the original headlight switches to the headlights.
I put ends on the other half of the original wires and plugged them into the fuse box.
This is the circuit that was built. One for high beam and one for low beam.